HyperX Pulsefire Haste 3 Pro Wireless Battery Replacement

*Warning: Improper or forced battery installation may cause permanent damage and is not covered under warranty.

​

1. Switch power mode to "OFF".

2. Remove the mouse skates with a flat plastic tool to reveal and unscrew the 4x Torx 2 security screws below.

3. Gently separate and lift the top shell from bottom shell in an upward motion.

4. Locate and remove the battery secured with a connector.

5. Place new battery matching correct pin oritentation.

6. Close bottom and top case of the mouse by using the alignment clips. Reverse steps 3 and 2.

7. Power on the mouse and test for functionality.