Cloud Jet

Cloud Jet Overview A. Swivel-to-mute microphone B. Status LED C. Mode switch D. Volume wheel E. USB-C charge port F. Multifunction button G. USB wireless dongle H. Pairing pin hole I. USB-C to USB-A charge cable

1. Power OFF the headset. 2. Carefully pull the left ear cushion from the headset. 3. Unscrew the 4x Philips screws to separate the driver cover from the left earcup. 4. Gently separate the cover from the earcup to avoid any damage. 5. Locate and remove the battery secured with a connector. 6. Place

Adapter Mode 1. Slide the mode switch Wireless to mode. 2. Connect the USB wireless dongle to a PC or game console. 3. Power ON the headset. Bluetooth Mode 1. Slide the mode switch to Bluetooth mode. The headset will flash blue on the first setup. 2. Go to your device Bluetooth settings, search, and

Status LED Multifunction Button Power on/off - Hold the button for 2 seconds to power the headset on/off. Media controls: o 1 x Play/Pause o 2 x Play next song o 3 x Play previous song Volume Wheel Scroll up and down to adjust the volume level.

It is recommended that your headset be charged fully before first use.

Set the headset mode switch to adapter mode (WiFi symbol). While the headset is powered off, hold down the multifunction button until the headset LED starts blinking red/green rapidly. The headset is now in pairing mode. While the USB wireless dongle is plugged in, use a small tool (e.g. paper clip,

Windows 11 To ensure the headset is configured correctly on the PC, follow the steps below: 1. Right-click on the sound icon in the system tray and select Sound Settings. 2. Set the output device to Headphones [HyperX Cloud Jet]. 3. Set the input device to Microphone [HyperX Cloud Jet]. PlayStation

Cloud Jet Quick Start Guide

HyperX Cloud Jet User Manual