Cloud Stinger Family

HyperX Cloud Stinger 3 Wireless Quick Start Guide

A. Swivel-To-Mute Microphone B. Status LED C. Power Button D. USB-C Charge Port E. Multifunction Button F. Volume Wheel G. Wireless Mode Switch H. USB Wireless Dongle I. Dongle Status LED J. Pairing Pin Hole K. USB-C to USB-A Adapter L. USB-C Charge Cable

Slide the Wireless mode switch to the Bluetooth symbol Press and hold both the power button and the multifunction buttons for 2 seconds. Pairing mode is active when the LED blinks blue and the voice prompt says "Bluetooth pairing". Go to your device's Bluetooth settings and connect to "HyperX Cloud

Cloud Stinger Usage (Xbox One™) To use the headset with Xbox One™, connect the 3.5mm plug on the headset directly to the 3.5mm jack on the Xbox™ One controller * If your Xbox One™ controller does not have a 3.5mm jack, you will need the Xbox One™ Stereo Headset adapter (sold separately) that plugs i

Cloud Stinger Core Wireless +7.1 Quick Start Guide

1. Connect the wireless adapter to the PC. 2. Power on the headset. 3. Right click speaker icon > Select Open Sound settings > Select Sound Control Panel 4. Under the Playback tab, click on “HyperX Cloud Stinger 2 Wireless” and click on the Set Default button. 5. Under the Recording tab, click on “H

HyperX CloudX Stinger 3 Xbox Quick Start Guide

Cloud Stinger Wireless Specifications Headphone Driver: Dynamic, 50mm with neodymium magnets Type: Circumaural, Closed back Frequency response: 20Hz-20,000Hz Impedance: 32 Ohm Sound pressure level: 109dBSPL/mW at 1kHz T.H.D.: < 2% Weight: 270g Cable length and type: USB charging cable (1m) Microphon

Microphone Down Position - Microphone Mute Off Microphone Up Position - Microphone Mute On

In-line audio control operation The in-line audio control contains a volume wheel to adjust the headphone output volume and a microphone mute slider to mute the microphone. To increase the headset volume, rotate the volume wheel clockwise (towards the + sign). To reduce the volume, rotate the volume