Headset

HYPERX CLOUD ALPHA S HEADSET – HSCAS Firmware Update Rev. 4110 Part Numbers: HX-HSCAS-BL, HX-HSCAS-BK Description: This firmware update adds compatibility with additional systems to the Alpha S USB audio adapter. See release notes below for more details. Downloads: Firmware Updater 4110

Cloud Stinger Core Wireless 7.1 Power and Status LED Status LED Charging It is recommended to fully charge your headset before first use.

Cloud Stinger 2 Microphone Function ​

Headphone Driver: Dynamic, 53mm with neodymium magnets Type: Circumaural, Closed back Frequency response: 15Hz–20kHz Impedance: 60 Ω Sound pressure level: 104dBSPL/mW at 1kHz T.H.D.: ≤ 1% Weight: 300g Weight with mic: 309g Cable length and type: USB charge cable (0.5m) Microphone Element: Electret c

Microphone Down Position - Microphone Mute Off Mcirphone Up Position - Microphone Mute On

Plug the headset into the controller via 3.5mm jack

Cloud Alpha Wireless User Manual

While the headset is powered off, hold down the power button until the headset status LED starts blinking red / green rapidly. The headset is now in pairing mode. While the USB wireless dongle is plugged in, use a small tool (eg. paper clip, SIM tray ejector, etc.) to hold down the button inside the

Status LED ​

Setting up with PC Right-click the speaker icon > Select Open Sound settings > Select Sound control panel. ​​ Playback Device Set Default Device to "HyperX Cloud III" ​​ Recording Device Set Default Device to "HyperX Cloud III"