麥克風

Plug the provided USB-C to USB-A cable into the microphone and PC or console

​​ -110 dB 衰減器 0dB -10dB 衰減器關閉 -10dB -10dB 衰減器開啟 開啟 -10dB PAD（被動衰減器）會將麥克風的動態餘裕增加 10dB，方法是在訊號到達麥克風電子元件之前降低訊號電平。這樣就可以錄製更大音量的聲音來源，而不會使麥克風電子元件過載並導致失真。 ​ 80Hz高通濾波器 ​ ​​ 80Hz高通濾波器開啟 ​ ​​ 80Hz高通濾波器關閉 啟用 80Hz 高通濾波器可以濾除麥克風輸出中的隆隆聲或其他不必要的低頻訊號。此濾波器會在 80Hz 處將輸出電平降低 3dB，並以每倍頻程 12dB 的速率滾降。

Note: The LED ring will present the polar pattern status 3 seconds when switching the polar pattern then shows the current light effect, but the LED will be turned off when muting the microphone.

​ ​ A. Tap-to-Mute Sensor B. Gain Control Knob C. Polar Pattern Knob D. Headphone Jack E. USB Cable Port F. USB Cable G. Mount Adapter* *Supports both 3/8” and 5/8” thread sizes

QuadCast 2 S 快速入門指南

使用麥克風支架 SoloCast 可以從支架上取下，並與帶有 3/8” 或 5/8” 螺紋的麥克風支架一起使用。 ​

Tap the top of the microphone to mute/unmute the microphone. The microphone status LED will indicate the current mute status. ​

Hold and turn gently to remove or attach microphone to the shock mount.

Quadcast S User Manual

QuadCast 2 S can be removed from its stand and used with microphone mounts with either 3/8” or 5/8” threads. ​