Microphone

Quadcast User Manual

QuadCast 2 S should be placed with the front of the microphone facing the sound source. The side with HyperX logo is the front side. ​

A. Tap-To-Mute Sensor B. RGB LED Ring C. Tilt Adjustment D. 3.5mm Headphone Jack E. USB-C Port F. Mounting Threads G. USB-C to USB-A Cable

Press the multifunction button to cycle between adjustment modes, shown by the [microphone] and [headset] LED's. The multifunction control's LED ring will indicate the setting of the currently selected mode. ​

Hold the volume knob down for 2 seconds to change the polar pattern

SoloCast Overview A. Top-to-mute Sensor B. Microphone Status LED C. Microphone Alignment Guide D. Microphone Stand E. USB-C Port F. USB Cable

Quadcast Microphone Specifications Microphone Power consumption: 5V 125mA ample/bit rate: 48kHz/16-bit Element: Electret condenser microphone Condenser type: Three 14mm condensers Polar patterns: Stereo, Omnidirectional, Cardioid, Bidirectional Frequency response: 20Hz - 20kHz Sensitivity: -36dB (1V

SoloCast 2 should be positioned with the front HyperX (HX) logo facing the sound source for optimals performance. SoloCast 2 can be tilted 40 degress to allow for easy adjustment

Selecting a Polar Pattern ​ Rotate the polar pattern knob to select one of the four polar patterns. ​ Adjusting Gain Control ​ Rotate the gain control knob to adjust the gain of the microphone. Muting the Microphone ​ Tap the top of the microphone to mute/unmute the microphone. The microphone LED wi

The microphone mount adapter is included with the packaging of our Quadcast/Quadcast S microphones. It does not come attached to the unit, please check the box and all packing materials for the adapter piece.