Pulsefire Saga Pro

Includes 2 sets of magnetic, modular parts (shell, button cover, and side buttons) to customize the shape and feel. ​ ​

There are 4 default DPI presets: 400 DPI (Red) | 800 DPI (Blue) | 1600 DPI (Yellow) | 3200 DPI (Green). Max DPI: Up to 26000 DPI. Onboard Polling Rate Switch The default polling rate is 1k polling rate.

A. Left Click Button B. Right Click Button C. Mouse Wheel D. Forward Button (1) E. Back Button F. USB-C Port G. HyperX 26k Sensor H. Power Mode Switch I. DPI Button J. Shell K. Button Cover (A) L. USB Wireless Dongle Storage M. Button Cover (B) N. Forward Button (2) O. Back Button (2) P. Shell (2) Q

Firmware Update Exit NGENUITY from the System Task Bar on the bottom left corner (Right Click -> Exit). If NGENUITY is not installed nor running on your system, proceed to Step 2. Connect the Mouse to the PC via the USB cable. Run the Mouse updater file and press Update. Press OK upon completion and

HyperX Pulsefire Saga Pro User Manual

This specific process will only work if the mouse and the OMEN Laptop have never paired with each other. Additionally, the firmware of the mouse must be version 1121 or higher. Move the mouse close to the compatible OMEN Laptop, within 20cm or less. The module the mouse needs to pair with is located

2.4G Wireless Mode 1. Switch the mouse to 2.4G power mode. 2. Connect the USB 4k wireless dongle to the extension adapter. 3. Connect the extension adapter to a PC or game console using the included USB cable. Bluetooth Mode 1. Switch the mouse to Bluetooth power mode. The mouse will flash blue on t

It is recommended to charge your mouse fully before your first use. Connect the mouse to a PC or game console using the USB cable. USB connectivity will override the selected power mode. ​ ​

To reset the mouse's Instant Pair pairing table: Clear the Laptop's pairing table first. On the compatible OMEN laptop it's paired to via Instant Pair, go into NGENUITY. Go into NGENUITY Settings. Find the mouse in the device list, and click Forget Device. Clear the mouse's pairing table: Also insid

To force the mouse to connect via Instant Pair to a compatible system: Move the mouse power switch to “OFF”. Hold the “Back Button” on the mouse. While holding the Back Button, move power switch to “2.4G”. The mouse will blink Orange four times when successfully connected to the compatible system vi