HyperX Clutch Gladiate RGB Programmable Buttons

HyperX Clutch Gladiate RGB Programmable Buttons
Assign P2 / P3
Hold P1 and Release when Power LED is slowly flashing

While the Power LED is flashing slowly, press one of the following buttons to assign.

Clear P2 / P3
Hold P1 and Release when the Power LED is slowly flashing. Press either P2 or P3 to clear its button mapping.

Trigger Locks
Move the slider to position 1 to unlock the full trigger motion.

​

Clear P2 & P3
Hold P1 for 5 seconds. The Power LED will slowly ash and turn solid when complete.

​

Move slider to position 2 to lock and reduce trigger motion.