Clutch Gladiate

If you are experiencing drifting or issues with the analog sticks or triggers, Calibration Mode will allow you to re-calibrate the analog sticks and triggers. Enter Calibration Mode 1. Press and hold View Button + Menu Button + Xbox Button ​ ​ 2. While holding the buttons above, plug in the USB cabl

Programmable ButtonsAssign/Re-Assign P2 & P3 Hold P1 and Release when LED is slowly flashing ​​ ​ When LED is flashing slowly, press one of the following buttons to assign. ​ ​​ ​ When LED is flashing rapidly, press either P2 or P3 to assign your selected button. ​ ​ Clear individually P2 or P3 When

Ensure the Gladiate Xbox Controller is not connected to your device. Wipe gently with a slightly damp, soft cloth (e.g., Microfiber cloth).

Controller Specifications Connection Type: Wired Compatibility: Xbox Series X|S, Xbox One, PC Inputs: USB-C, Mic (3.5mm stereo headset jack) Outputs: Headphones (3.5mm stereo headset jack) Physical Specifications (Metric/Imperial) Length: 155mm / 6.10in Width: 110.56mm / 4.35in Height: 64.68mm / 2.5

​​ ​ A. Analog sticks (L3/R3) B. Xbox button C. Power LED D. ABXY buttons E. View button F. D-Pad G. Share button H. Menu button I. Trigger locks J. P1 button K. P2/P3 button L. 3.5mm headset jack M Bumpers (LB/RB) N. Triggers (LT/RT) O. USB-C port P. USB-C to USBA cable

HyperX Clutch Gladiate Quick Start Guide

HyperX Clutch Gladiate Setup (Xbox/PC) Connect the controller with the provided USB cable to your Xbox or PC. ​​ WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods.

HyperX Clutch Gladiate User Manual