FlipCast

Use an XLR cable to connect the microphone's output to a balanced XLR omicrophone input. Phantom power is not required and should be switched off.

HyperX FlipCast User Manual

The HyperX FlipCast features a cardiod pickup pattern with the front being the most sensitive to sound. This is useful for reducing the pickup of background or other unwanted sounds. FlipCast is an end-address dynamic microhpone. For optimal vocal performance, speak directly into the front of the mi

FlipCast Quick Start Guide

When the microphone is not muted and no level adjustements are being made, the LED bar will show the microphone's level meter. Press the multifunction wheel to cycle between adjustment modes. Microphone Gain Headphone Volume * Monitor/Playback Mix* *USB connection only. 3.5mm connection required for

The HyperX FlipCast can be used with a micrphone stand or arm with either 3/8" or 5/8" threads. To use with 5/8" threads, use a coin to remove the pre-installed 3/8" thread adapter. Rotate the stand mount nut clockwise to attach the microphone. Adjust the desired position before tightening the nuts,

Tap-to-Mute Sensor: White - Mute Off Red - Mute On

150Hz High-Pass filter: On- Green ​ Switching on the high-pass filter reduces out rumble or other unwanted low frequencies. The high-pass filter has a cutoff frequency of 150Hz and a roll-off of 12dB/octave. Presence Boost: On - Green ​ Switching on the presence boost enhances upper-mid frequencies,