Cloud Flight 2

Read all instructions below, before attempting to replace the battery. Power OFF the headset. Carefully pull the right ear cushion from the headset. Note how it's slotted into the earcup. Unscrew the 4x Phillips screws to separate the driver cover from the right earcup. Gently separate the cover fro

Scroll the volume wheel to adjust volume level.

It is recommended to fully charge your headset before first use. ​ Charge Status Status LED Fully Charged Solid Green 61% - 99% Breathing Green 21% - 60% Breathing Yellow < 20% Breathing Red

Slide the mode switch to Bluetooth. Press and hold both the power button and the multifunction button for 2 seconds. Pairing mode is active when the LED blinks blue and the voice prompt says, "Bluetooth pairing". Go to your device's Bluetooth settings and connect to "HyperX Cloud Flight 2 Wireless".

Power on the gaming laptop. Locate the Wireless Module. Open the OMEN laptop screen. Identify the wireless receiver module located on the top right corner of the screen bezel. ​ Set the Headset to Adapter Mode. Slide the connection mode switch on the headset to WiFi symbol. With the headset in adapt

Slide the headset wireless mode switch to the WiFi symbol. Connect the USB wireless dongle to your device. Power ON the headset.

A. Mic mute / monitoring button B. Status LED C. Power button D. USB-C charge port E. Microphone port/ internal microphone F. Multifunction button G. Volume wheel H. Wireless mode switch I. Removable earcup plates J. Customizable RGB lighting K. Detachable microphone L. Microphone mute LED M. USB wi

Cloud Flight 2 User Manual

Go to the home page and select Settings > Sound. For the microphone, set the Input Device to USB Headset "HyperX Cloud Flight 2 Wireless". For audio output, set the Output Device to USB Headset "HyperX Cloud Flight 2 Wireless". Additionally, set Output to Headphones to "All Audio".

Press both the power and multifunction buttons to toggle RGB LEDs on / off.* *Software required to customize RGB colors and lighting effects.