Clutch Gladiate Family

No. There is no software support for Clutch Gladiate RGB.

Clean the controller surface with a lightly damp, microfiber cloth.

HyperX Clutch Gladiate RGB Programmable Buttons Assign P2 / P3 Hold P1 and Release when Power LED is slowly flashing While the Power LED is flashing slowly, press one of the following buttons to assign. Clear P2 / P3 Hold P1 and Release when the Power LED is slowly flashing. Press either P2 or P3 to

Yes you can use multiple Clutch Gladiate RGB.

Yes. The button mappings will be saved and can be carried over to another system.

Clutch Gladiate RGB Analog Sticks and Triggers If the user is experiencing issues with their analog sticks (drifting) or triggers, Calibration Mode will allow them to re-calibrate the analog sticks and triggers. What is Analog Stick Drift? It's when the user doesn't move the analog stick, but in-gam

Xbox Series X|S, Xbox One, and PC.

Clutch Gladiate RGB Factory Reset Hold P1, P2, & P3 simultaneously for 5 seconds, until the Power LED flashes and RGB LEDs flash Red at the same time. Note: Controler must not be in Lighting Mode or Programming Mode to function. This will reset the controller to factory settings. All programmable bu

If you are experiencing drifting or issues with the analog sticks or triggers, Calibration Mode will allow you to re-calibrate the analog sticks and triggers. Enter Calibration Mode 1. Press and hold View Button + Menu Button + Xbox Button ​ ​ 2. While holding the buttons above, plug in the USB cabl

We recommend using the one included with the controller, as we can't guarantee compatibility (fit and functionality) with all cables.