Clutch Gladiate RGB Analog Sticks and Triggers
mis à jour
Clutch Gladiate RGB Analog Sticks and Triggers If the user is experiencing issues with their analog sticks (drifting) or triggers, Calibration Mode will allow them to re-calibrate the analog sticks and triggers.
What is Analog Stick Drift? It's when the user doesn't move the analog stick, but in-game they can see the character/screen move slowly without the stick being physically touched.
Enter Calibration Mode 1. Press and hold View Button + Menu Button + Xbox Button 2. While holding the buttons above, plug in the USB cable to power on the controller (Xbox or PC) 3. The LED will rapidly blink continuously, showing it is in Calibration Mode. Perform Calibration Mode 1. In a full circular motion for Analog Sticks
Slowly rotate both analog sticks at their furthest distance.
Repeat this step for a total of 3 times. (Either clockwise or counterclockwise.)
2. Move both Trigger buttons
Switch both trigger lock sliders to position 1 (unlocked) or position 2 (locked) according to the user-preferred distance of pressing the trigger button.
Fully press and release both Left Trigger and Right Trigger.
Repeat this step for a total of 3 times.
There are no LED indicators if the calibration steps were performed incorrectly. If unsure calibration steps were performed correctly or incorrectly, please repeat the "Perform Calibration" steps again. Exit Calibration Mode 1. Press Y and D-Pad Down simultaneously to save and exit Calibration Mode. 2. The LED will turn off for 3 seconds and then power on with a solid LED.