HyperX Pulsefire Haste 2 Pro Battery Replacement
mis à jour
1. Switch the power mode to "OFF".
2. Remove the PTFE Skates with a flat, plastic tool (e.g. spudger, fingernails) to reveal the 4x Torx 6 Security Screws below the feet.
3. Gently separate and lift the top shell from the bottom shell in an upward motion.
4. Locate and remove the battery secured with a connector.
5. Connect/place the new battery, matching the correct pin orientation.
6. Close the bottom and top case of the mouse by using the alignment clips. Screw all 4 screws and place the PTFE skates back on mouse.
7. Switch the mouse back on and test for functionality.