Pulsefire Haste 2 Pro

HyperX Pulsefire Haste 2 Pro User Manual

This specific process will only work if the mouse and the OMEN Laptop have never paired with each other. Additionally, the firmware of the mouse must be version 1121 or higher. Move the mouse close to the compatible OMEN Laptop, within 20cm or less. The module the mouse needs to pair with is located

To reset the mouse's Instant Pair pairing table: Clear the Laptop's pairing table first. On the compatible OMEN laptop it's paired to via Instant Pair, go into NGENUITY. Go into NGENUITY Settings. Find the mouse in the device list, and click Forget Device. Clear the mouse's pairing table: Also insid

Pulsefire Haste 2 Pro Firmware Update Exit NGENUITY from the System Task Bar on the bottom left corner (Right Click -> Exit). If NGENUITY is not installed nor running on your system, proceed to Step 2. Connect the Mouse to the PC via the USB cable. Run the Mouse updater file and press Update. Press

How long does it take the mouse to charge from an empty to fully charged battery? It takes roughly about 2-3 hours to fully charge your mice. Just a tip, there is no fast-charging support for this product.

The mouse can’t operate on Bluetooth and 2.4G simultaneously, as the power switch allows only one connection mode at a time. However, you can use both Bluetooth and 2.4G on different computers. Pairing information for Bluetooth is saved and will auto-connect once in BT power mode. When switching bet

If you happen to get a replacement USB dongle and don't know how to pair, follow the steps below! Select 2.4G for the connection type. Hold the Left Mouse Button & Right Mouse button + DPI Button at the same time until the mouse flashes Orange. Unplug/Plug in the USB dongle into your system. You wil

To customize lighting, DPI, macro settings, and more, download HyperX NGENUITY software at: NGENUITY

To perform a Factory Reset of the Pulsefire Haste 2 Pro: Hold DPI button and Scroll wheel for 5 seconds. The scroll wheel will flash red 2 times momentarily and disappear once reset has completed. This will reset the following on the mouse: DPI to 800 and 4 profiles Polling Rate to 1000Hz on 2.4GHz

There are 4 default DPI presets. 400 DPI (red) 800 DPI (blue) 1600 DPI (yellow) 3200 DPI (green) Max DPI Supported: Up to 26000 DPI.