Pulsefire Haste 2

Grip Tape Pulsefire Haste 2 includes grip tape, which can be used for added control and comfort if desired. Attach the button grip tape for the left [1] and right [2] mouse buttons, with the pointed end facing the forward direction of the mouse. Attach the side grip tape for the left [3] and right [

Press and hold the DPI button + Mouse wheel button simultaneously until the mouse LED flashes red ​ Factory Settings DPI Level: 400 / 800 / 1600 / 3200 Polling rate: 1000Hz RGB lighting: Cycle effect Button Assignments

Switch between 1000Hz (default) and 8000Hz polling rate. 1. Hold down the DPI Button. 2. While holding down the DPI button, Connect the mouse to a computer. 3. Continue holding the DPI button until either color (see table below) appears on the mouse wheel. 4. Release the DPI button. The LED will bli

Pulsefire Haste 2 Cleaning and Care To clean your mouse, follow the instructions below: Unplug the mouse from your device. Wipe gently with a slightly damp, soft cloth (e.g., microfiber cloth). Avoid using harsh cleaners such as products containing bleach.

Pulsefire Haste 2 Overview A. Left Click B. Right Click C. Mouse Wheel D. DPI Button E. Forward button F. Back button G. HyperX 26K Sensor H. Grip Tape I. Mouse skates

Connect the mouse to a PC or game console containing a USB 2.0 (High-Speed) or higher port.

Pulsefire Haste 2 Quick Start Guide

Pulsefire Haste 2 Firmware Update 1106 Description: Fixed the LED powering on, upon system plug in. Fixed white mouse color in NGENUITY. Downgrading to a firmware older than 1106 will cause the mouse color to turn black. Fixed lost DPI button functionality, when modifying DPI button functionality in

DPI There are 4 default DPI presets. Up to 5 DPI levels can be stored on the mouse. Customizing and saving DPI levels can be done within HyperX NGENUITY software.

Pulsefire Haste 2 User Manual