Cloud

Cloud User Manual

Usage (PlayStation® 4) For optimal use with PlayStation® 4 (PS4®), connect your HyperX Cloud headset to the PS4 game controller and follow these steps: 1. Turn on your PS4® game console. 2. Navigate to the Settings Menu and select it. 3. Highlight the ‘Devices’ menu option and select it. 4. Scroll d

Usage (with Control Box) Connect your headset to the control box that has both a headset jack and a microphone jack on it. The headset jack (green stripes) plugs into the green input port on the control box and the microphone jack (pink stripes) plugs into the pink input port on the control box. The

Usage with Mobile Device (Phone or Tablet) To use the HyperX Cloud headset with a mobile device, simply plug the “Y” cable into the 3.5mm audio jack as seen below. (NOTE: Location of the audio jack may vary based on the model and/or brand of mobile device you are using.) The volume of the conversati

Cloud Usage (PC) To connect the headset to your computer (or other devices) that has both a headphone jack and a microphone jack, connect the headset’s 3.5mm plug to the female jack on the PC extension cable. The PC extension cable has two 3.5mm jacks. The audio plug, which has green stripes, plugs

Technical Specifications Headset Transducer type: Dynamic 53mm Operating principle: Closed Frequency response: 15Hz-25KHz (earphones) Nominal impedance: 60 ohm per system Nominal SPL: 98+/-3dB T.H.D: < 2% Power handling capacity: 150mW • Sound coupling to the ear: Circumaural Ambient noise attenuati

Cloud Usage (with Control Box and Headset Splitter Cable) If you are connecting the headset to a laptop or mobile device (phone or tablet) that has a single audio jack, generally marked with earphones or headset symbol. Connect the control box to the headset splitter cable. This will convert the sep

Usage (Xbox® One) To use the HyperX Cloud headset with Xbox® One, you will need the Xbox One adapter (sold separately) that plugs into the Xbox® One controller (pictured below.) Because this adapter has built-in volume controls, you can remove the control box that came with your HyperX Cloud headset

Cloud Usage (Correct vs Incorrect) When connecting your HyperX Cloud headset to a device that has a single 3.5mm audio jack, you MUST use the splitter cable (or “Y” cable) to ensure that each jack is connected properly and securely plugged in. Do NOT ignore or leave any audio jacks unplugged as depi

Usage (Direct Connect) Connect your headset directly to your computer (or other devices) that have both a headset jack and a microphone jack. The headset jack, which has green stripes, plugs into the port signified by a green input or earphones symbol, and the microphone jack, which has pink stripes