Cloud III S Wireless - Instant Pair - Pairing with OMEN by HP Gaming Laptop

1. Locate the Wireless Module.

   1. Open the OMEN laptop screen. Identify the wireless receiver module located on the top right corner of the screen bezel.

   

2. Set the Headset to Adapter Mode.

   1. Slide the connection mode switch on the headset to WiFi mode. With the headset in Adapter mode, hold down the power button to power it on.

3. Position the Headset

   1. Place the headset within 20 centimeters (8 inches) of the OMEN laptop.

4. Wait for Automatic Pairing.

   1. The headset should automatically pair with the laptop within a few seconds.

   2. If pairing does not occur:

      1. Turn the headset off, then back on while keeping it close to the laptop.

      2. Ensure the laptop is powered on and not in sleep mode.

      3. Confirm the headset is sufficiently charged.

      4. Unplug the USB wireless dongle if the headset is connecting to the dongle instead of

         the laptop.

5. Confirm the Connection.

   1. Listen for a confirmation tone or check the LED indicator on the headset.

   2. To verify, play audio on the laptop and confirm it is routed through the headset.

Notes:

1. After completing Instant Pair, the headset will default to the Instant Pair connection in adapter mode.

2. To have the headset connect back to the USB wireless dongle, double press the power button to switch between OMEN gaming laptop connection and USB wireless dongle connection.