Pulsefire Haste 3 Pro Wireless

Connect the mouse to a PC or game console using the included USB cable. USB connectivity will override the selected power mode.

The default polling rate is 1k Power off the mouse completely. Press and hold the DPI button. While holding down the DPI button, switch the mouse to 2.4G mode. Repeat the cycle to the next polling rate; the wheel LED fast blinks twice. There are 3 default presets: 1000Hz (White) 4000Hz (Cyan) 8000Hz

A. Left Click Button B. Right Click Button C. Mouse Wheel D. Forward Button E. Back Button F. USB-C Port G. Premium Glass Skates H. HyperX Performance Sensor I. Power Mode Switch J. DPI Button K. Grip Tape L. Extra Mouse Skates M. 8K Wireless Desktop Dongle N. USB Charge/ Data Cable

HyperX Pulsefire Haste 3 Pro Wireless Quick Start Guide

Switch the mouse to Bluetooth power mode. Mouse will flash blue on first setup. Go to your computer's Bluetooth settings, search and connect to "Haste 3 Pro".

Turn the mouse upside down.Gently slide a plastic pry tool under the edge of a skate.Slowly lift and peel the skate away from the mouse.Repeat for all skates.Remove all leftover adhesive residue and debris. (you may need to use rubbing alcohol and a microfiber cloth to get it completely clean).Allow

Connect the mouse to a PC or game console using the included USB cable. When the battery level drops below 10%, the mouse wheel blinks red. When it's less than 5%, the LED turns off. *USB connectivity will override the selected power mode.

Switch the mouse to 2.4G opwer mode Connect the wireless desktop dongle to a PC or game console using the included USB cable. For omtimal placement, keep the wireless desktop dongle within 20cm of the mouse.

Hold the left click button, right click button, and SPI buttons simultaneously until the mouse flashed blue.

There are 4 default DPI presets: 400 DPI (Red) 800 DPI (Blue) 1600 DPI (Yellow) 3200 DPI (Green) *Max DPI up to 42000 DPI