Cloud Alpha S

Connecting Headset to PC 1. Connect the headset into the USB audio control mixer with the 3.5mm 4-pole cable. 2. Connect the USB audio control mixer into the PC’s USB port. Windows Setup 1. Right click speaker icon in system tray, then select Open Sound settings. 2. In Sound settings window, select

Mic mute / mic monitoring button Press the mic mute/mic monitoring button to toggle mic mute on or off. LED On – Mic muted LED Off – Mic active Hold the button for 3 seconds to toggle mic monitoring on or off. Headset volume buttons Press the volume +/- buttons to adjust headset master volume up or

You can connect it to your PS4 via either 3.5mm directly into the controller, or using the included USB sound card. Please note that the Game/Chat balance feature is Windows exclusive and will not work with PlayStation consoles.

Cloud Alpha S Bass Adjustment Move the bass adjustment sliders up or down to change the amount of bass in the headset. Move the sliders up for more bass. Move the sliders down for less bass.

Cloud Alpha S User Manual

Headphone Driver: Custom dynamic, 50mm with neodymium magnets Type: Circumaural, Closed back Frequency response: 13Hz – 27kHz Impedance: 65 Ω Sound pressure level: 99dBSPL/mW at 1kHz T.H.D.: ≤ 1% Weight: 310g Weight with mic: 321g Cable length: Detachable headset cable (1m) Connection type: Detachab

Cloud Alpha S Quick Start Guide

Using with console & mobile Connect the headset to the device’s 3.5mm port with the 3.5mm (4-pole) cable.

Discord Setup 1.Under Discord settings, select Voice & Video. 2. Under Voice Settings, select Input Device to Microphone (HyperX Cloud Alpha S Chat). 3. Select Output Device to Headset Earphone (HyperX Cloud Alpha S Chat).

HYPERX CLOUD ALPHA S HEADSET – HSCAS Firmware Update Rev. 4110 Part Numbers: HX-HSCAS-BL, HX-HSCAS-BK Description: This firmware update adds compatibility with additional systems to the Alpha S USB audio adapter. See release notes below for more details. Downloads: Firmware Updater 4110