Cloud Flight 2 Series

Connecting the CloudX Flight 2 with PC Slide the headset wireless mode switch to adapter mode Connect the USB wireless dongle to your device Power ON the headset

Go to Sound Settings and set the Output device to HyperX CloudX Flight 2 Wireless and Input device to HyperX CloudX Flight 2 Wireless

Read all instructions below, before attempting to replace the battery. Power OFF the headset. Carefully pull the right ear cushion from the headset. Note how it's slotted into the earcup. Unscrew the 4x Phillips screws to separate the driver cover from the right earcup. Gently separate the cover fro

Scroll the volume wheel to adjust volume level.

It is recommended to fully charge your headset before first use. ​ Charge Status Status LED Fully Charged Solid Green 61% - 99% Breathing Green 21% - 60% Breathing Yellow < 20% Breathing Red

It is recommended to fully charge your headset before first use.

Power on the gaming laptop. Locate the Wireless Module. Open the OMEN laptop screen. Identify the wireless receiver module located on the top right corner of the screen bezel. ​ Set the Headset to Adapter Mode. Slide the connection mode switch on the headset to WiFi symbol. With the headset in adapt

Slide the headset wireless mode switch to the WiFi symbol. Connect the USB wireless dongle to your device. Power ON the headset.

A. Mic mute / monitoring button B. Status LED C. Power button D. USB-C charge port E. Microphone port/ internal microphone F. Multifunction button G. Volume wheel H. Wireless mode switch I. Removable earcup plates J. Customizable RGB lighting K. Detachable microphone L. Microphone mute LED M. USB wi

Press the power button to display the battery level Power on/off - Hold the button for 2 seconds to power headset on/off. Battery level status – Press button to see the battery level status on the status LED* and to hear the battery level via voice prompt. *The status LED will automatically turn off