Cloud Stinger 2 Series

Scroll up or down to adjust the volume level

Headphone Driver: Dynamic, 40mm with neodymium magnets Form factor: Over ear, circumaural, closed back Frequency response: 10 Hz – 25 kHz Impedance: 32.5 Ω Sensitivity: 95 dBSPL/mW at 1 kHz T.H.D.: ≤ 2% Frame type: Plastic Ear cushions: Soft foam & fabric Microphone Element: Electret condenser micro

CloudX Stinger 2 Quick Start Guide

The headset and wireless adapter are automatically paired together out of the box. But if manual pairing is needed, follow the steps below to pair the headset and wireless adapter. 1. While the headset is off, hold the power button until the headset status LED starts blinking red/green rapidly. 2. W

Plug the headset into the controller via 3.5mm jack

Connecting the HyperX Cloud Stinger 2 Core for PS to the PlayStation 5 Plug the headset into the controller via 3.5mm jack Go to PS5 Settings > Sound > Audio Output > Output to Headsets > All Audio

Headset status Tone Notification Power On - 1 tone (mid) Power Off - 2 tones (high, low) Maximum volume reached - 3 tones (high) Minimum volume reached - 3 tones (low) Low battery (10%) - 4 tones (mid, low, mid, low) Microphone muted - 2 tones (high, high) Microphone active - 1 tone (high) Mic monit

LED Charge Status ​

Microphone Down Position - Microphone Mute Off Microphone Up Position - Microphone Mute On

Scroll up or down to adjust volume level