Cloud Flight

HyperX Cloud Flight User Manual

20 meters (65 feet) is the effective wireless range in optimal conditions. Environmental conditions such as obstacles, interference from other wireless signals, etc., will reduce the effective range

Yes. However, for best user experience we do not recommend charging the headset during use due to possible white noise (static).

Cloud Flight Overview ​ A. Volume Wheel B. Microphone Port C. USB Charge Port D. Analog Headphone Port E. Power Button F. Mic Mute Button G. Detachable Microphone H. Wireless Adapter I. Wireless Status LED J. USB Charge Cable

​ Power Status Beep Tone Indicator Power on One tone (high) Power off Two tones (high, low) Volume Status Beep Tone Indicator Setting to 100% maximum volume Three tones (high) Setting to 0% minimum volume Three tones (low) Microphone Mute Status Beep Tone Indicator Microphone muted Two tones (high)

คุณสามารถใช้ไมโครโฟน Cloud Flight ได้เฉพาะในโหมดไร้สายเท่านั้น การเชื่อมต่อชุดหูฟังผ่านแจ็ค 3.5 มม. จะทำให้คุณได้ยินเสียงออก

HYPERX CLOUD FLIGHT HEADSET – HSCFFirmware Update Rev. 3116/4103 Part Numbers: HX-HSCF-BK Description: This firmware update contains two different sets of firmware: Rev. 3116 for build AxxLF/BxxLF and Rev. 4103 for CxxLF. The updater will automatically flash the correct firmware based on the build o

Charging It is recommended to fully charge your headset before first use. When the charging cable is connected the ear cup LED will indicate the status. Power Power on - Hold down power button for 3 secs until you hear a beep. Power off - Hold down power button for 3 secs until you hear a beep. LED

If the light on the headset is turned off and the volume is at 50%, the battery should last about 30 hours. The battery will drain faster if you have the volume higher or the lighting effects turned on. By default, the light will be on when the headset is turned on. Short press the power button to t

Cloud Flight PC, PS4™ or Mac® Usage Connect the wireless adapter to a USB port on your PC, PS4 or Mac. (The wireless adapter status light will blink.) Power on the headset. When the wireless adapter status light is solid the headset is connected. Note: If it is your first time using the headset you