QuadCast Family

*HyperX Cloud III Wired Not Included ​

​ Connect headphones to the headphone jack on the microphone for microphone monitoring and playback audio.

Installing Quadcast S Microphone the Mount Adapter Secure the included mount adapter onto a microphone boom arm. The mount adapter supports 3/8" and 5/8" thread sizes. Remove both the thumbscrew and nut from the microphone stand. Remove the microphone stand from the microphone. Align the mount adapt

You can use a USB C to USB C cable but it will only work with one orientation of the USB C connection (on the microphone side). This does not affect the USB C to USB A cable included with the microphone.

​ ​ A. Tap-to-Mute Sensor B. Gain Control Knob C. Polar Pattern Knob D. Headphone Jack E. USB Cable Port F. USB Cable G. Mount Adapter* *Supports both 3/8” and 5/8” thread sizes

Note: The LED ring will present the polar pattern status 3 seconds when switching the polar pattern then shows the current light effect, but the LED will be turned off when muting the microphone.

คู่มือเริ่มต้นใช้งานอย่างรวดเร็วสำหรับ QuadCast 2 S

Tap the top of the microphone to mute/unmute the microphone. The microphone status LED will indicate the current mute status. ​

Hold and turn gently to remove or attach microphone to the shock mount.

Quadcast S User Manual