Cloud III Series

HyperX Cloud III S Wireless User Manual

Status LED ​

Connect the USB wireless dongle to your device. Set headset mode switch to the WiFi icon. Power on the headset. To ensure the headset is configured correctly on the PC, follow the steps below. Right-click on the sound icon in the system tray and select Sound Settings. Set the output device to Speake

Instant Pair should be possible as long as the OMEN laptop is “Connection Ready” in NGENUITY settings and the headset has not been previously paired with another OMEN laptop. If either the OMEN laptop or the headset has been paired already, both the laptop and the headset need the Instant Pair pairi

Power off the headset. Carefully pull the right ear cushion from the headset. Unscrew the 4x Phillips screws to separate the driver cover from the right earcup. Gently separate the cover from the earcup to avoid any damage. Locate and remove the battery secured with the connector. Place new battery

In NGENUITY software, nagivate to the Settings tab. Under "Connected Hardware", find "HyperX Internal Wireless Audio Adapter" and click on "Initiate Pairing Mode". Click on the "Start Pairing" button. The laptop is now in pairing mode. While the headset is powered off, hold down the power button unt

Double press the power button to switch between OMEN gaming laptop connection and USB wireless dongle connection.

Setting up with PC Right-click the speaker icon > Select Open Sound settings > Select Sound control panel. ​​ Playback Device Set Default Device to "HyperX Cloud III" ​​ Recording Device Set Default Device to "HyperX Cloud III"

​​ Please note that no Cloud III wired settings configured within NGENUITY are saved onto the headset (USB). They will not persist when used with another system.

HP and its HyperX brand maintain strict standards for materials selection and product testing. Our products undergo comprehensive evaluation, validated by accredited, independent third-party laboratories to confirm compliance with established global regulatory requirements for electronic devices. We