Cloud Flight S

To enable/disable mic monitoring on Cloud Flight S, press the mic monitoring toggle pictured below.

Setting up with PC 1. Connect the wireless USB adapter to the PC. 2. Power on the headset. 3. Right-click speaker icon > Select Open Sound settings > Select Sound Control Panel 4. Under the Playback tab, click on “HyperX Cloud Flight S Chat”. Then click on the down arrow next to Set Default and sele

Cloud Flight S Quick Start Guide

Setting up with Discord 1. In Discord settings, select Voice & Video. 2. Under Voice Settings, set Input Device to “Microphone (HyperX Cloud Flight S Chat)”. 3. Set Output Device to “Headset Earphone (HyperX Cloud Flight S Chat)”.

Cloud Flight S Firmware Update 4107 Download Firmware

Setting up with PlayStation 4 1. Set Input Device to USB Headset (HyperX Cloud Flight S) 2. Set Output Device to USB Headset (HyperX Cloud Flight S) 3. Set Output to Headphones to All Audio 4. Set Volume Control (Headphones) to the maximum.

Cloud Flight S LED Status ​ Status Pairing - Flash Green and Red every .5 seconds Searching - Slow breathing Green Battery Level 90%-100% - Solid Green 15%-90% - Blinking Green

Cloud Flight S Specifications Headphone Driver: Dynamic, 50mm with neodymium magnets Type: Circumaural, Closed back Frequency response: 10Hz–20kHz Impedance: 32 Ω Sound pressure level: 99.5dBSPL/mW at 1kHz T.H.D.: < 1% Weight: 310g Weight with mic: 320g Cable length and type: USB charge cable (1m) M

Cloud Flight S Wireless Power Consortium Product Listing

Charging the Headset It is recommended to fully charge your headset before first use. When charging the headset, the headset status LED will indicate the current charge status. Qi wireless charging To charge the headset via Qi wireless, place the left earcup onto a Qi wireless charging base. Wired c