HyperX Support Center
Knowledge Base Articles
Knowledge Base Articles
Cloud MIX 2 Connection Modes Dual Mode (default): The headset can connect to a 2.4GHz Ultra-Low Latency USB dongle and Bluetooth device. In this Mode, the headset prioritizes the USB dongle connection and automatically switches to Bluetooth for communication if the dongle connection becomes unavaila
Knowledge Base Article
•
Cloud MIX 2
Cloud MIX 2 Factory Reset Press and hold [ Power ] & [ Multifunction ] button for 10 seconds to initiate Factory Reset. The power status LED will start blinking red and white.
Knowledge Base Article
•
Cloud MIX 2
Cloud MIX 2 Using the Multifunction Button Using the [ Multifunction ] button, the following media controls are available when using Bluetooth® or the Ultra-Low Latency USB dongle: Using the [ Multifunction ] button, the following phone controls are available when using Bluetooth®: Note: Button func
Knowledge Base Article
•
Cloud MIX 2
Cloud MIX 2 Manually Pairing USB Adapter 1. Plug the USB Adapter into a support device. 2. Make sure headset is powered off, then press and hold the [Power] button for 10 seconds. The headset status LED will begin flashing white quickly. 3. Press and hold the USB adapter button for 10 seconds until
Knowledge Base Article
•
Cloud MIX 2
Cloud MIX 2 Using 3.5mm Connection Headset power is required for noise control when using a wired connection. Note: The wired connection does not support microphone audio
Knowledge Base Article
•
Cloud MIX 2
Cloud MIX 2 Overview A. Volume Wheel B. Voice microphones C. ANC microphone D. Power LED E. Power button F. Microphone mute LED G. Microphone mute button H. 3.5mm headphone jack I. USB-C charge port J. Multifunction button K. Noise cancellation button L. Earcup caps (L/R) M. Ultra-Low Latency USB do
Knowledge Base Article
•
Cloud MIX 2
Cloud MIX 2 Charging It is recommended that the headset be fully charged before first use. When charging, the power status LED indicates the headset’s battery level. 10-minutes charging gives up to 6 hours of playback when the battery is low.
Knowledge Base Article
•
Cloud MIX 2
Cloud MIX 2 Microphone Mute / Microphone Monitoring Button Mic mute toggle - Press the [ microphone mute ] button to turn the mic mute on/off. Mic monitoring toggle – Hold the [ microphone mute ] button for 2 seconds to toggle mic monitoring on/off.
Knowledge Base Article
•
Cloud MIX 2
Cloud MIX 2 Bluetooth Pairing To enter Bluetooth pairing mode, press and hold the [ Power ] and [ Multifunction ] buttons for 2 seconds. The power status LED will begin blinking blue. Once connected, it will turn solid blue and fade off, returning to the connection mode indication. If the pairing de
Knowledge Base Article
•
Cloud MIX 2