Controller

HyperX Clutch Gladiate RGB Quick Start Guide

HyperX Clutch Wireless Gaming Controller Quick Start Guide

Calibration Calibration can address issues related to analog sticks and triggers. To activate calibration mode: Set the mode selection switch to USB. Hold down Start and Select. While still holding down both buttons from the previous step, plug in the USB-C cable. Continue holding down both buttons

To toggle the controller on / off when in 2.4G or Bluetooth mode, press the Home button. The controller will attempt to connect to your device. The controller will automatically shut off after 5 minutes of inactivity. To switch to Handheld mode, attach the mobile clip and insert a phone. ​ ​​ ​ Fold

A. Action Buttons B. Analog Sticks (L3/R3) C. D-Pad D. Home Button E. Mode Selection Switch F. Bumpers (L1/R1) G. Triggers (L2/R2) H. USB-C Port I. Convertible Mobile Clip J. 2.4GHz Wireless Adapter K. USB-C to USB-A Cable

Turbo Turbo can be assigned to individual buttons to emulate repeated button presses. After setting Turbo, press and hold the desired button. Turbo can only be assigned to L3, R3, A, B, X, Y, LT, RT, LB, RB and D-Pad.

​Reset The controller can be manually power cycled by pressing the pinhole button on the rear of the controller. Once you've successfully reset the controller, you must calibrate the device. ​

​​ To connect directly via USB cable (also good for charging at the same time), please connect the controller to the host system using the provided USB-C to USB-A cable and swap it to the cable mode, indicated by the USB symbol. To connect to the 2.4GHz wireless adapter, swap the controller to the 2

Schauen Sie sich zunächst die Unterseite des Controllers an, also die Seite, die beim Gebrauch normalerweise nach unten zeigt. Dort befindet sich üblicherweise ein Aufkleber mit einer Teilenummer und daneben meist dem Produktnamen. Die häufigste Struktur ist 4Pxxxx, die Nummerierung kann aber auch a

HyperX Clutch Gladiate RGB Lighting Mode Enter Lighting Mode Quickly double-press P1. The power LED will slowly breathe. ​​ Profile and Brightness Press Left or Right on the D-Pad to switch Lighting Profiles: Cycle, Solid, and Breathing. Press Up or Down on the D-Pad to adjust Brightness. ​​ Color a