Pusat Dukungan HyperX
Artikel Basis Pengetahuan
Artikel Basis Pengetahuan
Cloud Flight S Specifications Headphone Driver: Dynamic, 50mm with neodymium magnets Type: Circumaural, Closed back Frequency response: 10Hz–20kHz Impedance: 32 Ω Sound pressure level: 99.5dBSPL/mW at 1kHz T.H.D.: < 1% Weight: 310g Weight with mic: 320g Cable length and type: USB charge cable (1m) M
Knowledge Base Article
•
Cloud Flight S
Headset Controls Power button Hold the power button for 3 seconds to power on/off the headset. With the headset powered on, short press the power button to cycle through the ear cup LED modes. The supported LED modes are solid (default), breathing, and off. Volume wheel Rotate the volume wheel up or
Knowledge Base Article
•
CloudX Flight
Connect the headset using the USB cable. It is recommended to fully charge the headset before first use* Fully Charged - Solid Green 61%-99% - Breathing Green 21%-60% - Breathing Yellow
Knowledge Base Article
•
Cloud Stinger 3 Wireless
Connect the USB cable to the headset and device to charge the headset. Fully Charged - Solid Green 61%-99% - Breathing Green 21%-60% - Breathing Yellow
Knowledge Base Article
•
CloudX Stinger 3 Wireless
Tekan tombol mute mikrofon untuk mengaktifkan/menonaktifkan mute mikrofon: LED menyala: Mikrofon dimatikan LED Mati: Mikrofon aktif
Knowledge Base Article
•
Cloud Alpha Air
Usage (Xbox One™) To use the headset with an Xbox One™, connect the 3.5mm plug on the headset directly to the 3.5mm jack on the Xbox™ One controller* If your Xbox One™ controller does not have a 3.5mm jack, you will need the Xbox One™ Stereo Headset adapter (sold separately) that plugs into the Xbox
Knowledge Base Article
•
Cloud Alpha
Cloud Silver Specification Headphone Driver: Dynamic, 53mm with neodymium magnets Type: Circumaural, closed back Frequency response: 15Hz–25,000 Hz Impedance: 60 Ω Sound pressure level: 98dBSPL/mW at 1kHz THD: < 2% Input power: Rated 150mW, maximum 300mW Weight: 309g Weight w/ mic: 322g Cable length
Knowledge Base Article
•
Cloud Silver
Pengaturan USB PlayStation 4 1. Hidupkan headset. 2. Tahan roda pengatur volume mikrofon selama 2 detik untuk mengubah mode audio. Ulangi langkah ini hingga headset memutar perintah suara “2 Channel”. 3. Sambungkan headset ke konsol PlayStation 4 menggunakan kabel USB Type-C ke USB Type-A. 4. Dari m
Knowledge Base Article
•
Cloud Orbit S
Headset Charging When the headset is connected to a charger with the USB charge cable, the ear cup LEDs will indicate the charge status.
Knowledge Base Article
•
CloudX Flight
Jika Anda menyadari bahwa audio tidak seimbang saat menggunakan mode 3D pada headset Orbit S, mungkin perlu dilakukan pengaturan pusat. Lihat ke tengah layar Anda dan tekan tombol 3D untuk menandainya sebagai titik fokus audio. Anda akan melihat bahwa menggerakkan posisi kepala Anda tidak mengubah t
Knowledge Base Article
•
Cloud Orbit S