Casque-micro

Cloud Flight S Specifications Headphone Driver: Dynamic, 50mm with neodymium magnets Type: Circumaural, Closed back Frequency response: 10Hz–20kHz Impedance: 32 Ω Sound pressure level: 99.5dBSPL/mW at 1kHz T.H.D.: < 1% Weight: 310g Weight with mic: 320g Cable length and type: USB charge cable (1m) M

Headset Controls Power button Hold the power button for 3 seconds to power on/off the headset. With the headset powered on, short press the power button to cycle through the ear cup LED modes. The supported LED modes are solid (default), breathing, and off. Volume wheel Rotate the volume wheel up or

Connect the headset using the USB cable. It is recommended to fully charge the headset before first use* Fully Charged - Solid Green 61%-99% - Breathing Green 21%-60% - Breathing Yellow

Connect the USB cable to the headset and device to charge the headset. Fully Charged - Solid Green 61%-99% - Breathing Green 21%-60% - Breathing Yellow

Appuyez sur le bouton de coupure du micro pour activer/désactiver la coupure du micro : Voyant LED allumé : micro coupé LED éteinte : Micro actif

Usage (Xbox One™) To use the headset with an Xbox One™, connect the 3.5mm plug on the headset directly to the 3.5mm jack on the Xbox™ One controller* If your Xbox One™ controller does not have a 3.5mm jack, you will need the Xbox One™ Stereo Headset adapter (sold separately) that plugs into the Xbox

Cloud Silver Specification Headphone Driver: Dynamic, 53mm with neodymium magnets Type: Circumaural, closed back Frequency response: 15Hz–25,000 Hz Impedance: 60 Ω Sound pressure level: 98dBSPL/mW at 1kHz THD: < 2% Input power: Rated 150mW, maximum 300mW Weight: 309g Weight w/ mic: 322g Cable length

Configuration USB de la PlayStation 4 1. Allumez le casque. 2. Maintenez la molette de volume du microphone enfoncée pendant 2 secondes pour changer de mode audio. Répétez cette étape jusqu'à ce que le casque émette le message vocal « 2 canaux ». 3. Connectez le casque à la console PlayStation 4 à l

Headset Charging When the headset is connected to a charger with the USB charge cable, the ear cup LEDs will indicate the charge status.

Si vous constatez un déséquilibre audio en mode 3D sur le casque Orbit S, il se peut que le son doive être recentré. Fixez le centre de votre écran et appuyez sur le bouton 3D pour le définir comme point de focalisation audio. Vous remarquerez que les mouvements de votre tête ne modifient pas le poi