Pulsefire Haste 2 Series

DPI Presets There are 4 default DPI presets: 400 DPI (red) | 800 DPI (blue) | 1600 DPI (yellow) | 3200 DPI (green)

There are 4 default DPI presets. 400 DPI (red) 800 DPI (blue) 1600 DPI (yellow) 3200 DPI (green) Max DPI Supported: Up to 26000 DPI.

How long does it take the mouse to charge from an empty to fully charged battery? It takes roughly about 2-3 hours to fully charge your mice. Just a tip, there is no fast-charging support for this product.

A. Left click button B. Right click button C. Mouse wheel D. DPI button E. Forward button F. Back button G. USB-C port H. Premium glass skates I. HyperX 26K Sensor J. Power mode switch K. USB wireless dongle storage L. Grip tape M. Extra mouse skates N. USB wireless dongle O. Extension adapter P. US

2.4G Wireless Mode Switch the mouse to 2.4G power mode. Connect the USB wireless dongle to the extension adapter. Connect the extension adapter to a PC or game console using the included USB cable. For optimal placement, keep the wireless adapter within 20cm of the mouse. ​​ Bluetooth Mode (NGENUITY

Switch between 1000Hz (default) and 8000Hz polling rate. 1. Hold down the DPI Button. 2. While holding down the DPI button, Connect the mouse to a computer. 3. Continue holding the DPI button until either color (see table below) appears on the mouse wheel. 4. Release the DPI button. The LED will bli

Pulsefire Haste 2 Overview A. Left Click B. Right Click C. Mouse Wheel D. DPI Button E. Forward button F. Back button G. HyperX 26K Sensor H. Grip Tape I. Mouse skates

Pulsefire Haste 2 Quick Start Guide

1. Turn Off the Mouse. Switch power mode to "OFF". 2. Remove the PTFE Skates with a flat, plastic tool (e.g. spudger, fingernails) to reveal the 4x Torx 6 Security Screws below the feet. 3. Gently separate and lift the top shell from the bottom shell, in an upward motion 4. Locate and remove the bat

Charging It is recommended to fully charge your mouse before first use. The mouse is charged via USB-C, located at the top of the mouse. While plugged in, the mouse will operate in wired mode. 2.4G Wireless Mode 1. Switch the mouse to 2.4G power mode. 2. Connect the USB dongle to the USB adapter. 3.