Pulsefire Haste 2 Series

Articles - Category Page

  • HyperX Pulsefire Haste 2 Pro Battery Replacement

    1. Switch the power mode to "OFF". 2. Remove the PTFE Skates with a flat, plastic tool (e.g. spudger, fingernails) to reveal the 4x Torx 6 Security Screws below the feet. 3. Gently separate and lift the top shell from the bottom shell in an upward motion. 4. Locate and remove the battery secured wit

    Knowledge Base Article

  • HyperX Pulsefire Haste 2 Cleaning and Care

    Pulsefire Haste 2 Cleaning and Care To clean your mouse, follow the instructions below: Unplug the mouse from your device. Wipe gently with a slightly damp, soft cloth (e.g., microfiber cloth). Avoid using harsh cleaners such as products containing bleach.

    Knowledge Base Article

  • HyperX Pulsefire Haste 2 DPI

    DPI There are 4 default DPI presets. Up to 5 DPI levels can be stored on the mouse. Customizing and saving DPI levels can be done within HyperX NGENUITY software.

    Knowledge Base Article

  • HyperX Pulsefire Haste 2 Pro Ngenuity Settings

    You can customize the following features for the Pulsefire Haste 2 Pro through Ngenuity: Lift Off Distance RGB lighting DPI Macros Polling Rate (2.4G/Wired Only) Button re-assignment

    Knowledge Base Article

  • HyperX Pulsefire Haste 2 Pro Firmware Update

    Pulsefire Haste 2 Pro Firmware Update Exit NGENUITY from the System Task Bar on the bottom left corner (Right Click -> Exit). If NGENUITY is not installed nor running on your system, proceed to Step 2. Connect the Mouse to the PC via the USB cable. Run the Mouse updater file and press Update. Press

    Knowledge Base Article

  • HyperX Pulsefire Haste 2 Pro Windows 11 and Lighting Controls Not Responding

    If you are using the Pulsefire Haste 2 Pro on a Windows 11 system, and your lighting controls are not responding, Windows Dynamic Lighting (WDL) may be enabled. This will override any NGENUITY lighting controls and behavior, as long as the mouse is connected to the PC. Please check if WDL is enabled

    Knowledge Base Article

  • HyperX Pulsefire Haste 2 Pro Windows Dynamic Lighting (WDL)

    The Pulsefire Haste 2 Pro is supported with Windows Dynamic Lighting (WDL). Windows Dynamic Lighting (WDL) in Windows 11 allows lighting control outside of NGENUITY. Please refer to WDL documentation for supported effects.

    Knowledge Base Article

  • HyperX Pulsefire Haste 2 Firmware Update

    Pulsefire Haste 2 Firmware Update 1106 Description: Fixed the LED powering on, upon system plug in. Fixed white mouse color in NGENUITY. Downgrading to a firmware older than 1106 will cause the mouse color to turn black. Fixed lost DPI button functionality, when modifying DPI button functionality in

    Knowledge Base Article