Pulsefire Haste Family

Articles - Category Page

  • HyperX Pulsefire Haste 3 Pro Wireless Quick Start Guide

    HyperX Pulsefire Haste 3 Pro Wireless Quick Start Guide

    Knowledge Base Article

  • What is the charging time for the HyperX Puslefire Haste 2 Pro?

    How long does it take the mouse to charge from an empty to fully charged battery? It takes roughly about 2-3 hours to fully charge your mice. Just a tip, there is no fast-charging support for this product.

    Knowledge Base Article

  • HyperX Pulsefire Haste 2 Mini Wireless Charging and Wired Mode

    Charging and Wired Mode It is recommended to fully charge your mouse before first use. Connect the mouse to a PC or game console using the included USB cable. USB connectivity will override the selected power mode.

    Knowledge Base Article

  • HyperX Pulsefire Haste 2 Pro Onboard Polling Rate Switch

    The default polling rate is 1k polling rate. Enable 4k Wireless Polling Rate 1. Power off the mouse completely. 2. Press and hold the DPI button. 3. While holding the DPI button, switch the mouse to 2.4G mode. The wheel LED will fast-blink green four times. To revert to the default 1k polling rate,

    Knowledge Base Article

  • HyperX Pulsefire Haste 3 Pro Wireless DPI Presets

    There are 4 default DPI presets: 400 DPI (Red) 800 DPI (Blue) 1600 DPI (Yellow) 3200 DPI (Green) *Max DPI up to 42000 DPI

    Knowledge Base Article

  • HyperX Pulsefire Haste 2 Core Wireless Battery Installation

    Pulsefire Haste 2 Core Wireless Battery Installation 1. Remove the magnetic battery cover 2. Insert (2A) or Remove (2B) 1x AAA Battery 3. Install magnetic battery cover

    Knowledge Base Article

  • HyperX Pulsefire Haste 2 Pro Dust / Water Resistance

    Does the Haste 2 Pro support dust or water resistance? It does not! Please do not test this in any method or else it will void your warranty.

    Knowledge Base Article

  • HyperX Pulsefire Haste Skates Installation

    Replacement Skates Pulsefire Haste includes an extra set of PTFE skates in case the preinstalled skates are lost, damaged, or worn. Remove the damaged skate. Gently use a small flathead screwdriver or similar tool if needed. Remove adhesive residue and debris from the mouse. A clean dry surface will

    Knowledge Base Article

  • How to Swap the Connection mode on the HyperX Pulsefire Haste 2 Pro (Instant Pair / USB)

    To force the mouse to connect via Instant Pair to a compatible system: Move the mouse power switch to “OFF”. Hold the “Back Button” on the mouse. While holding the Back Button, move power switch to “2.4G”. The mouse will blink Orange four times when successfully connected to the compatible system vi

    Knowledge Base Article

  • HyperX Pulsefire Haste 2 S Quick Start Guide

    HyperX Pulsefire Haste 2 S Quick Start Guide

    Knowledge Base Article