Pulsefire Haste Family

Turn the mouse upside down.Gently slide a plastic pry tool under the edge of a skate.Slowly lift and peel the skate away from the mouse.Repeat for all skates.Remove all leftover adhesive residue and debris. (you may need to use rubbing alcohol and a microfiber cloth to get it completely clean).Allow

Warning: Improper or forced battery installation may cause permanent damage and is not covered under warranty. ​ Switch power mode to "OFF". Remove the mouse skates with a flat plastic tool to reveal and unscrew the 4x Torx 2 Security screws below. Gently separate and lift the top shell from the bot

Charging It is recommended to fully charge your mouse before first use. The mouse is charged via USB-C, located at the top of the mouse. While plugged in, the mouse will operate in wired mode. 2.4G Wireless Mode 1. Switch the mouse to 2.4G power mode. 2. Connect the USB dongle to the USB adapter. 3.

Pulsefire Haste 2 Wireless Quick Start Guide

Connect the mouse to a PC or game console using the included USB cable. *USB connectivity will override the selected power mode

The Pulsefire Haste 2 Pro is supported with Windows Dynamic Lighting (WDL). Windows Dynamic Lighting (WDL) in Windows 11 allows lighting control outside of NGENUITY. Please refer to WDL documentation for supported effects.

The Pulsefire Haste can save 1 customized profile to the onboard memory using the Ngenuity app. You can download Ngenuity software here.

Switch the mouse to Bluetooth power mode. Mouse will flash blue on first setup. Go to your computer's Bluetooth settings, search and connect to "Haste 3 Pro".

Mouse Factory Reset If you are experiencing any issue with the mouse you can perform a factory reset. You will lose your custom LED profile and DPI presets by doing this. ​ Press and hold the DPI button + Mouse Wheel click for 5 to10 seconds ​

Pulsefire Haste 2 User Manual