Headset

Articles - Category Page

  • Cloud Alpha 2 Wireless - Usage - Base Station

    USB-C port: Connect to any supported system for use in adapter mode eg. PC, PlayStation 5. 3.5mm line out: Output playback audio through line out to a supported device eg. powered speakers, when the base station is set to line out mode. 3.5mm line in: Mix in audio from a supported device eg. Switch

    Wissensdatenbank-Artikel

  • Cloud Core Specifications

    Technical Specifications Headset Transducer type: Dynamic 53mm Operating principle: Closed Frequency response: 15Hz-25KHz Nominal impedance: 60 ohm per system Nominal SPL: 98+/-3dB THD: < 2% • Power handling capacity: 150mW Sound coupling to the ear: Circumaural Ambient noise attenuation: Approx. 20

    Wissensdatenbank-Artikel

  • HyperX Cloud Stinger Core In-line audio controls

    In-line audio control operation The in-line audio control contains a volume wheel to adjust the headphone output volume and a microphone mute slider to mute the microphone. To increase the headset volume, rotate the volume wheel clockwise (towards the + sign). To reduce the volume, rotate the volume

    Wissensdatenbank-Artikel

  • Cloud Mix Benutzerhandbuch

    Cloud Mix Benutzerhandbuch

    Wissensdatenbank-Artikel

  • Cloud MIX 2 – Verwendung der Multifunktionstaste

    Cloud MIX 2 – Verwendung der Multifunktionstaste Über die [Multifunktions]-Taste stehen folgende Mediensteuerungen zur Verfügung: Verfügbar bei Verwendung von Bluetooth® oder des USB-Dongles mit extrem niedriger Latenz: Durch Über die [Multifunktions]-Taste werden folgende Telefonfunktionen aufgeruf

    Wissensdatenbank-Artikel

  • HyperX Cloud Jet Akkuwechsel

    1. Schalten Sie das Headset aus. 2. Ziehen Sie das linke Ohrpolster vorsichtig aus dem Headset heraus. 3. Lösen Sie die 4 Kreuzschlitzschrauben, um die Treiberabdeckung von der linken Ohrmuschel zu trennen. 4. Trennen Sie die Abdeckung vorsichtig von der Ohrmuschel, um Beschädigungen zu vermeiden. 5

    Wissensdatenbank-Artikel

  • Cloud Revolver (Xbox One™) Einrichtung

    Nutzung (Xbox One) Um das Headset mit Xbox One™ zu verwenden, verbinden Sie den 3,5-mm-Stecker des Headsets direkt mit der 3,5-mm-Buchse des Xbox One-Controllers. * Falls Ihr Xbox One Controller keinen 3,5-mm-Klinkenanschluss hat, benötigen Sie den Xbox One Stereo-Headset-Adapter (separat erhältlich

    Wissensdatenbank-Artikel

  • Cloud Orbit S Benutzerhandbuch

    Cloud Orbit S Benutzerhandbuch

    Wissensdatenbank-Artikel

  • Cloud Core Wireless DTS NGENUITY Compatibility

    The Cloud Core Wireless DTS is not compatible with NGENUITY. Any software interaction with the headset will be done through DTS® Sound Unbound®. Please follow the instructions on the included DTS instruction card to enable DTS Headphone:X ®. Please note there is no code to enter for this product; th

    Wissensdatenbank-Artikel

  • The Cloud III S Wireless is not compatible with Xbox.

    The Cloud III S Wireless is **not** compatible with Xbox.

    Wissensdatenbank-Artikel