Maus

A. Left-click button B. Right-click button C. Mouse wheel D. DPI button E. Forward button F. Back button G. Optical gaming sensor H. Grip tape I. Mouse skates

The default polling rate is 1K Power OFF the mouse completely. Press and hold the DPI button. While holding the DPI button, switch the mouse to 2.4G mode. Repeat cycle to the next polling rate; the wheel LED fast blinks twice. There are 3 default presets: 1000Hz (White) 4000Hz (Cyan) 8000Hz (Magenta

Switch the mouse to Bluetooth power mode. Mouse will flash blue on first setup. Go to your computer's Bluetooth settings, search and connect to "Haste 3 Pro".

There are 4 default DPI presets: 400 DPI (Red) 800 DPI (Blue) 1600 DPI (Yellow) 3200 DPI (Green) *Max DPI up to 42000 DPI

Pulsefire Haste Gaming Mouse User Manual

Polling Rate There are 4 default polling rate presets: 125Hz (green) 250Hz (blue) 500Hz (orange) 1000Hz (red) ​

​Pulsfeuerpfeil Produktliste des Wireless Consortium

Turn the mouse upside down.Gently slide a plastic pry tool under the edge of a skate.Slowly lift and peel the skate away from the mouse.Repeat for all skates.Remove all leftover adhesive residue and debris. (you may need to use rubbing alcohol and a microfiber cloth to get it completely clean).Allow

Turn the mouse upside down.Gently slide a plastic pry tool under the edge of a skate.Slowly lift and peel the skate away from the mouse.Repeat for all skates.Remove all leftover adhesive residue and debris. (you may need to use rubbing alcohol and a microfiber cloth to get it completely clean).Allow

Connect the mouse to a PC or game console using the included USB cable. When the battery level drops below 10%, the mouse wheel blinks red. When it's less than 5%, the LED turns off. *USB connectivity will override the selected power mode.