Auriculares

Cloud Flight S Specifications Headphone Driver: Dynamic, 50mm with neodymium magnets Type: Circumaural, Closed back Frequency response: 10Hz–20kHz Impedance: 32 Ω Sound pressure level: 99.5dBSPL/mW at 1kHz T.H.D.: < 1% Weight: 310g Weight with mic: 320g Cable length and type: USB charge cable (1m) M

Headset Controls Power button Hold the power button for 3 seconds to power on/off the headset. With the headset powered on, short press the power button to cycle through the ear cup LED modes. The supported LED modes are solid (default), breathing, and off. Volume wheel Rotate the volume wheel up or

Connect the headset using the USB cable. It is recommended to fully charge the headset before first use* Fully Charged - Solid Green 61%-99% - Breathing Green 21%-60% - Breathing Yellow

Connect the USB cable to the headset and device to charge the headset. Fully Charged - Solid Green 61%-99% - Breathing Green 21%-60% - Breathing Yellow

Pulsa el botón de silencio del micrófono para activar o desactivar el silencio del micrófono: LED encendido: Micrófono silenciado LED apagado: Micrófono activo

Usage (Xbox One™) To use the headset with an Xbox One™, connect the 3.5mm plug on the headset directly to the 3.5mm jack on the Xbox™ One controller* If your Xbox One™ controller does not have a 3.5mm jack, you will need the Xbox One™ Stereo Headset adapter (sold separately) that plugs into the Xbox

Cloud Silver Specification Headphone Driver: Dynamic, 53mm with neodymium magnets Type: Circumaural, closed back Frequency response: 15Hz–25,000 Hz Impedance: 60 Ω Sound pressure level: 98dBSPL/mW at 1kHz THD: < 2% Input power: Rated 150mW, maximum 300mW Weight: 309g Weight w/ mic: 322g Cable length

Configuración USB de PlayStation 4 1. Encienda los auriculares. 2. Mantén pulsada la rueda de volumen del micrófono durante 2 segundos para cambiar los modos de audio. Repite este paso hasta que los auriculares reproduzcan el mensaje de voz "2 canales". 3. Conecta los auriculares a la consola PlaySt

Headset Charging When the headset is connected to a charger with the USB charge cable, the ear cup LEDs will indicate the charge status.

Si notas que el audio no está equilibrado al usar el modo 3D en los auriculares Orbit S, es posible que debas centrarlo. Mira al centro de la pantalla y pulsa el botón 3D para marcarlo como punto focal del audio. Observarás que mover la cabeza no cambia el punto de referencia de la fuente de audio.