Microphone

FlipCast Quick Start Guide

When the microphone is not muted and no level adjustements are being made, the LED bar will show the microphone's level meter. Press the multifunction wheel to cycle between adjustment modes. Microphone Gain Headphone Volume * Monitor/Playback Mix* *USB connection only. 3.5mm connection required for

The HyperX FlipCast can be used with a micrphone stand or arm with either 3/8" or 5/8" threads. To use with 5/8" threads, use a coin to remove the pre-installed 3/8" thread adapter. Rotate the stand mount nut clockwise to attach the microphone. Adjust the desired position before tightening the nuts,

Tap-to-Mute Sensor: White - Mute Off Red - Mute On

A. Tap-to-mute sensor B. Gain control knob C. Polar pattern knob D. Headphone jack E. USB-C port F. USB cable G. Mount adapter* *Supports both 3/8” and 5/8” thread sizes

HyperX SoloCast 2 Pro Quick Start Guide

A. Tap-to-Mute Sensor B. LED ring C. Multifunction control D. 3.5mm headphone port E. USB-C port F. USB-C to USB-C cable G. USB-C to USB-A adapter

Paramètres SoloCast PS4 ​​ ​ Connectez le microphone à un port USB de la PS4™ à l'aide du câble USB fourni. Pour vous assurer que le microphone est correctement configuré sur la PS4™, suivez les étapes ci-dessous : Depuis le menu principal de la PS4™, accédez à Paramètres > Périphériques > Périphéri

PC - The Quadcast's mic monitoring can be disabled by going to Control Panel>Sound>Recording. Select the HyperX microphone and click Properties. Select the Listen tab and then disable "Listen to this device." The Quadcast S can be adjusted through Ngenuity under the Mic monitoring feature MAC - Open

Quadcast User Manual