Quadcast 2 Series

QuadCast 2 Attaching to Other Arms or Stands QuadCast 2 can be removed from its stand and used with microphone mounts with either 3/8” or 5/8” threads. ​

A. Tap-to-Mute Sensor B. LED ring C. Multifunction control D. 3.5mm headphone port E. USB-C port F. USB-C to USB-C cable G. USB-C to USB-A adapter

A. Tap-to-Mute Sensor B. LED ring C. Multifunction control D. 3.5mm headphone port E. USB-C port F. USB-C to USB-C cable G. USB-C to USB-A adapter

QuadCast 2 S should be placed with the front of the microphone facing the sound source. The side with HyperX logo is the front side. ​

Press the multifunction button to cycle between adjustment modes, shown by the [microphone] and [headset] LED's. The multifunction control's LED ring will indicate the setting of the currently selected mode. ​

Hold the volume knob down for 2 seconds to change the polar pattern

Here's a diagram of the options with which you can connect and use your QuadCast 2 microphone.

Press and hold the multifunction control button and tap-to-mute sensor for 10 seconds to factory reset the microphone. All red LEDs (include the top LED ring) will flash when the factory reset has been triggered.

Connect directly to computer's USB ports to use microphone.

Press the multifunction button to cycle through the adjustment modes. Turn the knob to the desired level. ​​ *3.5mm Connection Required ​ LED Microphone On - Headset Off = Adjust Microphpone Gain Microphone Off - Headset On = Adjust Playback Volume Microphone On - Hedaset On = Adjust Microphone Moni