Cloud Flight Series

You can only use the Cloud Flight microphone in wireless mode. Connecting the headset via 3.5mm jack will give you audio out.

Although Cloud Flight S is compatible with PS4, the chat mixer feature is only supported on PC.

​ Power Status Beep Tone Indicator Power on One tone (high) Power off Two tones (high, low) Volume Status Beep Tone Indicator Setting to 100% maximum volume Three tones (high) Setting to 0% minimum volume Three tones (low) Microphone Mute Status Beep Tone Indicator Microphone muted Two tones (high)

Headset Charging When the headset is connected to a charger with the USB charge cable, the ear cup LEDs will indicate the charge status.

To enable/disable mic monitoring on Cloud Flight S, press the mic monitoring toggle pictured below.

This may be caused by environmental interference around where the USB adapter is plugged in. Below are some tips that may help address this issue: Avoid plugging the dongle into USB hubs near other peripherals. This is especially true when using externally-powered hubs or accessories, as the electri

HyperX Cloud Flight User Manual

Cloud Flight S User Manual

Cloud Flight S LED Status ​ Status Pairing - Flash Green and Red every .5 seconds Searching - Slow breathing Green Battery Level 90%-100% - Solid Green 15%-90% - Blinking Green

Cloud Flight PC, PS4™ or Mac® Usage Connect the wireless adapter to a USB port on your PC, PS4 or Mac. (The wireless adapter status light will blink.) Power on the headset. When the wireless adapter status light is solid the headset is connected. Note: If it is your first time using the headset you