Cloud Alpha Family

Connecting Headset to PC 1. Connect the headset into the USB audio control mixer with the 3.5mm 4-pole cable. 2. Connect the USB audio control mixer into the PC’s USB port. Windows Setup 1. Right click speaker icon in system tray, then select Open Sound settings. 2. In Sound settings window, select

Mic mute / mic monitoring button Press the mic mute/mic monitoring button to toggle mic mute on or off. LED On – Mic muted LED Off – Mic active Hold the button for 3 seconds to toggle mic monitoring on or off. Headset volume buttons Press the volume +/- buttons to adjust headset master volume up or

Performing a hardware reset on the headset will do a soft reset on all the internal hardware. This may be useful if the headset has unusual behavior, such as unresponsive controls. To perform a hardware reset, press and hold the mic mute button and the multifunction button for 5 seconds. The headset

You can connect it to your PS4 via either 3.5mm directly into the controller, or using the included USB sound card. Please note that the Game/Chat balance feature is Windows exclusive and will not work with PlayStation consoles.

Pulsante per disattivare il microfono Jack per cuffie da 3,5 mm Porta microfono Rotella del volume Microfono staccabile LED di disattivazione microfono Cavo di prolunga per PC da 3,5 mm dongle USB Adattatore da USB-C a USB-A Cavo staccabile da 3,5 mm (da 5 poli a 4 poli)

Cloud Alpha S Bass Adjustment Move the bass adjustment sliders up or down to change the amount of bass in the headset. Move the sliders up for more bass. Move the sliders down for less bass.

The Cloud Alpha Wireless range is up to 20 meters *Wireless range may vary due to environmental conditions.

NGENUITY should automatically swap back to the hardware audio endpoints when the software and audio engine are not running. Check Windows sound settings and make sure the following devices are assigned correctly to the hardware endpoints: Default playback device: Headphones (HyperX Cloud Alpha 2 Wir

NGENUITY requires administrative permission to install the drivers. With default User Accoount Control settings, you should receive a pop-up for "DriverInstaller". You will need to click "Yes" for the drivers to install. You may also need to adjust User Account Control settings.

Cloud Alpha S User Manual