Cloud Alpha Series

Usage (PC) To connect the headset to your computer (or another device) that has both a headphone jack and a microphone jack, connect the headset’s 3.5mm plug to the female jack on the PC extension cable. The PC extension cable has two 3.5mm jacks. The audio plug, which has green stripes, plugs into

Discord Setup 1.Under Discord settings, select Voice & Video. 2. Under Voice Settings, select Input Device to Microphone (HyperX Cloud Alpha S Chat). 3. Select Output Device to Headset Earphone (HyperX Cloud Alpha S Chat).

HYPERX CLOUD ALPHA S HEADSET – HSCAS Firmware Update Rev. 4110 Part Numbers: HX-HSCAS-BL, HX-HSCAS-BK Description: This firmware update adds compatibility with additional systems to the Alpha S USB audio adapter. See release notes below for more details. Downloads: Firmware Updater 4110

Usage (PlayStation™ 4) To use the headset with a PlayStation™ 4 (PS4™), connect the 3.5mm plug on the headset directly to the PS4™ game controller and follow these steps: Turn on your PS4™ game console. Navigate to the ‘Settings’ Menu and select it. Highlight the ‘Devices’ menu option and select it.

Usage (Xbox One™) To use the headset with an Xbox One™, connect the 3.5mm plug on the headset directly to the 3.5mm jack on the Xbox™ One controller* If your Xbox One™ controller does not have a 3.5mm jack, you will need the Xbox One™ Stereo Headset adapter (sold separately) that plugs into the Xbox

Cloud Alpha Wireless User Manual

Cloud Alpha Wireless Specifications Headphone Driver: Dynamic, 50mm with neodymium magnets Form factor: Over ear, circumaural, closed back Frequency response: 15 Hz – 21 kHz Impedance: 62 Ω Sensitivity: 103 dBSPL/mW at 1 kHz T.H.D.: ≤ 2% Frame type: Aluminum Ear cushions: Memory foam and premium lea

Charging the Headset It is recommended to fully charge your headset before first use. When charging the headset, the headset status LED will indicate the current charge status. Wired Charging: To charge the headset via wired, plug the headset to a USB port with the USB charge cable.

Plug in the USB dongle and launch NGENUITY. Click on the Headset tab. Click "Install" on the "Audio Drivers Required" prompt. Wait until the drivers are finished installing. Click "Ok, Will Do" on the "drivers Installed" prompt. Restart your PC.

Setting up with PlayStation 4 1. Connect the wireless USB adapter to the PlayStation 4 console. 2. Set Input Device to USB Headset (HyperX Cloud Alpha Wireless) 3. Set Output Device to USB Headset (HyperX Cloud Alpha Wireless) 4. Set Output to Headphones to All Audio 5. Set Volume Control (Headphone