HyperX Pulsefire Haste 2 S Battery Replacement
更新済み
1. Turn Off the Mouse. Switch power mode to "OFF".
2. Remove the PTFE Skates with a flat, plastic tool (e.g. spudger, fingernails) to reveal the 4x Torx 6 Security Screws below the feet.
3. Gently separate and lift the top shell from the bottom shell, in an upward motion
4. Locate and remove the battery secured with a connector.
5. Connect new battery. Place new battery matching correct pin orientation.
6. Close bottom and top case of the mouse by using alignment clips. Screw all 4 screws and place PTFE skates back on mouse.
7. Turn on the Mouse. Switch the mouse back on and test for functionality