Cloud Stinger Family

CloudX Stinger Core Headset Specifications Headphone Driver: Dynamic, 40mm with neodymium magnets Type: Circumaural, closed back Frequency response: 20Hz-20,000Hz Impedance: 16 Ω Sound pressure level: 99dBSPL/mW at 1kHz THD: < 2% Weight: 215g Cable length and type: Headset (1.3m) Connection: Headset

Scroll up or down to adjust the volume level

Headphone Driver: Dynamic, 40mm with neodymium magnets Form factor: Over ear, circumaural, closed back Frequency response: 10 Hz – 25 kHz Impedance: 32.5 Ω Sensitivity: 95 dBSPL/mW at 1 kHz T.H.D.: ≤ 2% Frame type: Plastic Ear cushions: Soft foam & fabric Microphone Element: Electret condenser micro

CloudX Stinger 2 Quick Start Guide

Overview ​ A. Swivel to Mute Microphone B. Status LED C. Power Button D. Volume Wheel E. USB Charge Port F. USB Adapter G. Wireless Pairing Pin Hole H. Wireless Status LED I. USB Charge Cable

Slide the wireless mode switch to the Bluetooth symbol. The headset will enter Bluetooth pairing on the first setup. Go to your device Bluetooth settings, search and connect to "HyperX CloudX Stinger 3 Wireless".

Plug the headset into the controller via 3.5mm jack

HyperX Cloud Stinger 3 Overview A. Gaming Headset B. PC Splitter Cable

The headset and wireless adapter are automatically paired together out of the box. But if manual pairing is needed, follow the steps below to pair the headset and wireless adapter. 1. While the headset is off, hold the power button until the headset status LED starts blinking red/green rapidly. 2. W

Connecting the HyperX Cloud Stinger 2 Core for PS to the PlayStation 5 Plug the headset into the controller via 3.5mm jack Go to PS5 Settings > Sound > Audio Output > Output to Headsets > All Audio