Quadcast Series

​​ Connect the microphone to a USB port on the PS4 with the included USB cable. To ensure the microphone is configured with the most optimal settings on the PS4, follow the steps below: From the PS4 main menu, go to Settings > Devices > Audio Devices Set Input Device to USB Headset (HyperX QuadCast)

PC From the Sound control panel, on the Playback tab, right-click on Speakers HyperX QuadCast and select Properties. On the Levels tab, adjust the Microphone volume slider to adjust the level of microphone monitoring. macOS Open the Finder app and go to Applications > Utilities > Audio MIDI Setup Cl

A. Tap-to-mute sensor B. Gain control knob C. Polar pattern knob D. Headphone jack E. USB-C port F. USB cable G. Mount adapter* *Supports both 3/8” and 5/8” thread sizes

PC - The Quadcast's mic monitoring can be disabled by going to Control Panel>Sound>Recording. Select the HyperX microphone and click Properties. Select the Listen tab and then disable "Listen to this device." The Quadcast S can be adjusted through Ngenuity under the Mic monitoring feature MAC - Open

Quadcast User Manual

Quadcast Microphone Specifications Microphone Power consumption: 5V 125mA ample/bit rate: 48kHz/16-bit Element: Electret condenser microphone Condenser type: Three 14mm condensers Polar patterns: Stereo, Omnidirectional, Cardioid, Bidirectional Frequency response: 20Hz - 20kHz Sensitivity: -36dB (1V

Selecting a Polar Pattern ​ Rotate the polar pattern knob to select one of the four polar patterns. ​ Adjusting Gain Control ​ Rotate the gain control knob to adjust the gain of the microphone. Muting the Microphone ​ Tap the top of the microphone to mute/unmute the microphone. The microphone LED wi

The microphone mount adapter is included with the packaging of our Quadcast/Quadcast S microphones. It does not come attached to the unit, please check the box and all packing materials for the adapter piece.

Quadcast S Quick Start Guide

Installing Quadcast Microphone the Mount Adapter Secure the included mount adapter onto a microphone boom arm. The mount adapter supports 3/8" and 5/8" thread sizes. Remove both the thumbscrew and nut from the microphone stand. Remove the microphone stand from the microphone. Align the mount adapter