ชุดหูฟัง

Articles - Category Page

  • HyperX CloudX Stinger 2 Core for Xbox Volume Wheel

    Scroll up or down to adjust volume wheel

    Knowledge Base Article

  • CloudX Flight Controls

    Headset Controls Power button Hold the power button for 3 seconds to power on/off the headset. With the headset powered on, short press the power button to cycle through the ear cup LED modes. The supported LED modes are solid (default), breathing, and off. Volume wheel Rotate the volume wheel up or

    Knowledge Base Article

  • Charging the HyperX Cloud Stinger 3 Wireless Xbox headset

    Connect the USB cable to the headset and device to charge the headset. Fully Charged - Solid Green 61%-99% - Breathing Green 21%-60% - Breathing Yellow

    Knowledge Base Article

  • Charging the HyperX Cloud Stinger 3 Wireless Headset

    Connect the headset using the USB cable. It is recommended to fully charge the headset before first use* Fully Charged - Solid Green 61%-99% - Breathing Green 21%-60% - Breathing Yellow

    Knowledge Base Article

  • Cloud Alpha Air - ปุ่มปิดเสียงไมโครโฟน

    กดปุ่มปิดเสียงไมโครโฟนเพื่อเปิด/ปิดเสียงไมโครโฟน: ไฟ LED ติด: ไมโครโฟนปิดเสียง ไฟ LED ดับ: ไมโครโฟนทำงานอยู่

    Knowledge Base Article

  • Cloud Alpha Xbox One™ Setup

    Usage (Xbox One™) To use the headset with an Xbox One™, connect the 3.5mm plug on the headset directly to the 3.5mm jack on the Xbox™ One controller* If your Xbox One™ controller does not have a 3.5mm jack, you will need the Xbox One™ Stereo Headset adapter (sold separately) that plugs into the Xbox

    Knowledge Base Article

  • Cloud Silver Specification

    Cloud Silver Specification Headphone Driver: Dynamic, 53mm with neodymium magnets Type: Circumaural, closed back Frequency response: 15Hz–25,000 Hz Impedance: 60 Ω Sound pressure level: 98dBSPL/mW at 1kHz THD: < 2% Input power: Rated 150mW, maximum 300mW Weight: 309g Weight w/ mic: 322g Cable length

    Knowledge Base Article

  • การตั้งค่า Cloud Orbit S สำหรับ PlayStation 4 ผ่าน USB

    การตั้งค่า USB ของ PlayStation 4 1. เปิดใช้งานชุดหูฟัง 2. กดปุ่มปรับระดับเสียงไมโครโฟนค้างไว้ 2 วินาทีเพื่อเปลี่ยนโหมดเสียง ทำซ้ำขั้นตอนนี้จนกว่าหูฟังจะเล่นเสียงแจ้งเตือนว่า “2 Channel” 3. เชื่อมต่อชุดหูฟังเข้ากับเครื่อง PlayStation 4 โดยใช้สาย USB Type-C ถึง USB Type-A 4. จากเมนูหลักของ PS4 ไปที่ ก

    Knowledge Base Article

  • CloudX Flight Charging Status

    Headset Charging When the headset is connected to a charger with the USB charge cable, the ear cup LEDs will indicate the charge status.

    Knowledge Base Article

  • ชุดหูฟัง Orbit S ของฉันไม่สมดุลในโหมด 3 มิติ

    หากคุณสังเกตว่าเสียงไม่สมดุลเมื่อใช้โหมด 3 มิติบนชุดหูฟัง Orbit S อาจจำเป็นต้องปรับตำแหน่งให้อยู่ตรงกลาง มองไปที่กึ่งกลางหน้าจอแล้วกดปุ่ม 3 มิติเพื่อกำหนดให้เป็นจุดโฟกัสของเสียง คุณจะสังเกตได้ว่าการขยับศีรษะจะไม่เปลี่ยนแปลงจุดอ้างอิงของแหล่งกำเนิดเสียง

    Knowledge Base Article