Cloud Alpha Family

Articles - Category Page

  • Cloud Alpha Xbox One™ Setup

    Usage (Xbox One™) To use the headset with an Xbox One™, connect the 3.5mm plug on the headset directly to the 3.5mm jack on the Xbox™ One controller* If your Xbox One™ controller does not have a 3.5mm jack, you will need the Xbox One™ Stereo Headset adapter (sold separately) that plugs into the Xbox

    Knowledge Base Article

  • Hướng dẫn nhanh sử dụng Cloud Alpha Air

    Hướng dẫn bắt đầu nhanh

    Knowledge Base Article

  • Cloud Alpha Wireless Specifications

    Cloud Alpha Wireless Specifications Headphone Driver: Dynamic, 50mm with neodymium magnets Form factor: Over ear, circumaural, closed back Frequency response: 15 Hz – 21 kHz Impedance: 62 Ω Sensitivity: 103 dBSPL/mW at 1 kHz T.H.D.: ≤ 2% Frame type: Aluminum Ear cushions: Memory foam and premium lea

    Knowledge Base Article

  • Cloud Alpha Air - Nút tắt tiếng micrô

    Nhấn nút tắt tiếng micrô để bật/tắt chế độ tắt tiếng micrô: Đèn LED sáng: Mic đã được tắt tiếng. Đèn LED tắt: Mic đang hoạt động

    Knowledge Base Article

  • Cloud Alpha 2 Wireless - Controls - Power button

    Power on / off: Hold button for 2 seconds to power headset on / off. Battery level status: Press button to check the battery level. The status LED will automatically turn off to conserve battery life. Battery Level Headset Status LED 61% to 100% Solid-fade green 21% to 60% Solid-fade yellow 7% to 20

    Knowledge Base Article

  • Tai nghe Cloud Alpha Air - Sử dụng qua cổng 3.5mm với cáp mở rộng PC.

    Nếu máy tính của bạn có cổng tai nghe/mic tích hợp (thường có trên máy tính xách tay), hãy cắm giắc cắm 3.5mm trực tiếp vào máy tính. Nếu không, hãy cắm nó vào đầu cái của cổng mở rộng trên máy tính, sau đó cắm các đầu đực của cáp mở rộng vào các cổng tương ứng trên hệ thống.

    Knowledge Base Article

  • Cloud Alpha 2 Wireless - Controls - Volume Wheel

    Scroll up and down to adjust volume level.

    Knowledge Base Article

  • Cloud Alpha Wireless PlayStation 4 Setup

    Setting up with PlayStation 4 1. Connect the wireless USB adapter to the PlayStation 4 console. 2. Set Input Device to USB Headset (HyperX Cloud Alpha Wireless) 3. Set Output Device to USB Headset (HyperX Cloud Alpha Wireless) 4. Set Output to Headphones to All Audio 5. Set Volume Control (Headphone

    Knowledge Base Article

  • Cloud Alpha Air - Bánh xe điều chỉnh âm lượng

    Xoay bánh xe điều chỉnh âm lượng để tăng/giảm âm lượng. CẢNH BÁO: Có thể xảy ra tổn thương thính giác vĩnh viễn nếu sử dụng tai nghe ở âm lượng cao trong thời gian dài.

    Knowledge Base Article

  • Cloud Alpha 2 Wireless - Charging

    It is recommended to fully charge your headset before first use. Charge Status Status LED Fully Charged Solid Green 61% - 99% Breathing Green 21% - 60% Breathing Yellow < 20% Breathing Red

    Knowledge Base Article