Cloud Family

Articles - Category Page

  • CloudX In-Line Audio Control Operation

    In-line audio control operation The in-line audio control contains a volume wheel to adjust the headphone output volume and a microphone mute slider to mute the microphone. To increase the headset volume rotate the volume wheel clockwise (towards the + sign). To reduce the volume, rotate the volume

    Knowledge Base Article

  • Cloud Core Wireless DTS Specifications

    Headphone Driver: Dynamic, 53mm with neodymium magnets Form factor: Over-ear, circumaural, closed-back Frequency response: 10 Hz – 21 kHz Impedance: 60 Ω Sensitivity: 99 dB SPL/mW at 1 kHz T.H.D.: ≤ 1% Frame type: Aluminum Ear cushions: Memory foam Microphone Element: Electret condenser microphone P

    Knowledge Base Article

  • Cloud II Overview

    Cloud II Overview ​ A. Leatherette Headband w/ HyperX Logo B. Aluminuk Arm to Adjust Headband C. Attached Cable w/3.5mm input jack D. Detachable Microphone with Adjustable Arm and Condenser E. 3.5mm Audio Input Jack F. Extra Set of Ear Cushions G. Control Box Cable w/ USB Connector and Control Box H

    Knowledge Base Article

  • Cloud Core Usage with Mobile Device (Phone or Tablet)

    Cloud Core Usage with Mobile Device (Phone or Tablet) To use the HyperX Cloud Core headset with a mobile device, plug the 3.5mm jack directly into the headset jack on your phone or tablet. ​

    Knowledge Base Article

  • Cloud II Specifications

    Technical Specifications ​ Headset • Transducer type: Dynamic 53mm with Neodynium Magnets • Operating principle: Closed • Frequency response: 15Hz-25KHz (earphones) • Nominal impedance: 60 ohm per system • Nominal SPL: 98+/-3dB • T.H.D: < 2% • Power handling capacity: 150mW • Sound coupling to the e

    Knowledge Base Article

  • Cloud Core 7.1 Firmware Update

    HYPERX CLOUD VIRTUAL 7.1 SURROUND SOUND – USCCPSS Firmware Update Rev. 0010 Part Numbers: HX-USCCPSS-BK HX-HSCC-2-BK Description: This firmware update improves compatibility for the Cloud Virtual 7.1 Surround Sound USB audio adapter on console systems. This update can also be used on the USB audio a

    Knowledge Base Article

  • Cloud III Wireless - Manually pairing to wireless dongle

    While the headset is powered off, hold down the power button until the headset status LED starts blinking red / green rapidly. The headset is now in pairing mode. While the USB wireless dongle is plugged in, use a small tool (eg. paper clip, SIM tray ejector, etc.) to hold down the button inside the

    Knowledge Base Article

  • Cloud III Wireless Charging

    Charging It is recommended to fully charge your headset before first use.

    Knowledge Base Article

  • Cloud III Wireless Quick Start Guide

    Cloud III Wireless Quick Start Guide

    Knowledge Base Article

  • Cloud III Wireless User Manual

    Cloud III Wireless User Manual

    Knowledge Base Article