Cloud Family

In-line audio control operation The in-line audio control contains a volume wheel to adjust the headphone output volume and a microphone mute slider to mute the microphone. To increase the headset volume rotate the volume wheel clockwise (towards the + sign). To reduce the volume, rotate the volume

Headphone Driver: Dynamic, 53mm with neodymium magnets Form factor: Over-ear, circumaural, closed-back Frequency response: 10 Hz – 21 kHz Impedance: 60 Ω Sensitivity: 99 dB SPL/mW at 1 kHz T.H.D.: ≤ 1% Frame type: Aluminum Ear cushions: Memory foam Microphone Element: Electret condenser microphone P

Technical Specifications ​ Headset • Transducer type: Dynamic 53mm with Neodynium Magnets • Operating principle: Closed • Frequency response: 15Hz-25KHz (earphones) • Nominal impedance: 60 ohm per system • Nominal SPL: 98+/-3dB • T.H.D: < 2% • Power handling capacity: 150mW • Sound coupling to the e

Cloud II Overview ​ A. Leatherette Headband w/ HyperX Logo B. Aluminuk Arm to Adjust Headband C. Attached Cable w/3.5mm input jack D. Detachable Microphone with Adjustable Arm and Condenser E. 3.5mm Audio Input Jack F. Extra Set of Ear Cushions G. Control Box Cable w/ USB Connector and Control Box H

Cloud Core Usage with Mobile Device (Phone or Tablet) To use the HyperX Cloud Core headset with a mobile device, plug the 3.5mm jack directly into the headset jack on your phone or tablet. ​

HYPERX CLOUD VIRTUAL 7.1 SURROUND SOUND – USCCPSS Firmware Update Rev. 0010 Part Numbers: HX-USCCPSS-BK HX-HSCC-2-BK Description: This firmware update improves compatibility for the Cloud Virtual 7.1 Surround Sound USB audio adapter on console systems. This update can also be used on the USB audio a

Charging It is recommended to fully charge your headset before first use.

Cloud III Wireless Quick Start Guide

The DTS license provided with the Cloud III is not able to be used on Xbox, only PC. The license is accessed on PC by plugging in the Cloud III via the included USB adapter. As the USB adapter does not function on Xbox due to system limitations, the license is also not able to be used on Xbox to acc

While the headset is powered off, hold down the power button until the headset status LED starts blinking red / green rapidly. The headset is now in pairing mode. While the USB wireless dongle is plugged in, use a small tool (eg. paper clip, SIM tray ejector, etc.) to hold down the button inside the