Cloud III Wireless

Setting up with PlayStation 5 Go to the home page and select Settings > Sound Microphone Input Device: USB Headset “HyperX Cloud III Wireless” Audio Output Output Device: USB Headset “HyperX Cloud III Wireless” Output to Headphones: All Audio Under volume, set headphones slider to maximum level

Volume Wheel Scroll up and down to adjust the volume level.

Mic mute / Mic monitoring button Mic mute toggle - Press the button to turn the mic mute on/off Mic monitoring toggle – Hold the button for 3 seconds to toggle mic monitoring on/off

Power Button Power on/off - Hold the button for 3 seconds to power the headset on/off. Battery level status – Press the button to see the battery level status on the status LED. The status LED will automatically turn off to conserve battery life.

簡而言之：如果您的無線網路卡在 PS5 或其他系統上無法運作，但在其他裝置上卻可以正常運作，請使用外接電源的 USB 集線器。必須是外接電源的集線器。如果仍然遇到問題，請聯絡我們。 護理團隊。 如果您有一款無線產品（特別是耳機），它會透過無線 USB 轉接器連接，並且您嘗試將其與 PS5 一起使用，您可能會遇到 PS5 似乎無法識別 USB 的問題。 將USB轉接器插入PS5後，轉接器上的LED指示燈應該會亮起。如果指示燈不亮，則表示適配器無法正常運作。 然而，這可能並非加密狗本身的問題。主機端最近對USB介面的改變可能導致USB介面供電過高，進而導致USB加密狗進入安全模式。部分主機型號僅在

While the headset is powered off, hold down the power button until the headset status LED starts blinking red / green rapidly. The headset is now in pairing mode. While the USB wireless dongle is plugged in, use a small tool (eg. paper clip, SIM tray ejector, etc.) to hold down the button inside the

Charging It is recommended to fully charge your headset before first use.

Cloud III Wireless Quick Start Guide

Cloud III Wireless User Manual

Setting up with PC Right-click the speaker icon > Select Open Sound settings > Select Sound control panel. Playback Device Set the Default Device to “HyperX Cloud III Wireless” Recording Device Set the Default Device to “HyperX Cloud III Wireless”